DesignsBySiCK.com home page

Results 1 to 3 of 3

Thread: PE770

  1. #1
    Join Date
    Jul 2017
    Posts
    1
    Rep Power
    0

    Exclamation PE770

    I have a PE770 and everytime I go to embroider anything my needle ALWAYS BREAK! Can anybody tell me how to fix this? I have emailed Brother about the issue but no response. SO PLEASE SOMEBODY HELP ME!!!

  2. #2
    Join Date
    Feb 2010
    Posts
    16,880
    Rep Power
    353

    Default

    SayVion2017, first off welcome to Designs by Sick forum. Sorry for the delay in answering your question. I don't have a Brother machine, but when I googled your problem, I found some sites that might offer you help.

    This is directly from Brother itself: http://support.brother.com/g/b/faqen...qh00000316_001

    Good luck in getting your machine to work properly. Once it does, you will be hooked on machine embroidery. I know I am and have been doing it for 13 years.
    A smile is a curve that straightens everything out.
    http://thebreastcancersite.greatergo...igin=dbsFooter CLICK DAILY & Click for the earth http://www.brotherearth.com/en/top.h...k=BrotherEarth

  3. #3
    Join Date
    Oct 2009
    Posts
    5,614
    Rep Power
    128

    Default

    It could be that your thread is being caught on the spool. it puts tension on the needle and the needle snaps. Check you thread comes off the spool cleaning and is not getting caught on it. on some spools there is nick on the bottom.
    Love like there is no tomorrow Life upon the Earth is not a burden to be borne, but a joy to be learned and shared with others

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •