1 – snowmanlite_010
4 – snowmanlite_001
1 – snowmanlite_002
1 – snowmanlite_003
2 – snowmanlite_004
2 – snowmanlite_005
4 – snowmanlite_006
1 – snowmanlite_007
2 – snowmanlite_008
1 – snowmanlite_009
stitch the 5 panels (001 and 002) to 003 to from a star shape
next stitch the sides of each of the (001 and 002) panels to form a bowl.
stitch the (006) panels together at the narrow ends to form a circle or the
stitch the (004 and 005) panels together to form a tube.
stitch the (010) panel to the top of the tube to create your hat top.
It will need to be adjusted slightly as the tube will be a bit bigger then
the (010) panel
Next stitch the hat brim to the tube bottom. Fitting the edge of the tube
to the inside edge of the hat brim. Again the tube and hat brim will need
some adjustment to fit.
Roll the (007) panel into a cone and stitch to hold.
Attach to the (002) panel where you would like the snowman nose to be.
Hot glue the (008) eyes above the nose.
Place a ribbon around the hat and hot glue in the holly panel.
Insert a tea light or candy.
You can see/download/purchase the set by clicking here.